Carpets are expensive. Or at least good quality carpets with separate underlay and professional firing do. So, faced with a mouldy old carpet that needed replacing, I did the only logical thing.
I sanded down the floorboards and covered them in varnish.
Sanding and varnishing a wooden floor still isn’t massively cheap. A days hire of a drum sander and a edging sander clocks in at about £120 before delivery, with enough varnish to cover the twenty square meters three times coming in about £50. The cost of dust bags, sandpaper and painting supplies brought the whole lot to around £200, which I’m pretty sure is less than getting laminate or a decent carpet put down.
The sanding work was reasonably easy. The drum sander which I used to strip the body of the floor handled a bit like a petrol lawnmower, although with more power. It was extremely heavy though, and had to be lifted off the floor frequently so it could be turned round without gouging the floorboards
The floor in our spare bedroom was in shockingly good condition before I started. All that really needed to be taken off was the top layer of grime, water stains and some markings from the sawmill. I started with a medium grade of sandpaper, sanding in a diagonal direction to even out the boards and take off the worst of the muck. Two hours work saw the floor much more level and with most of the stains gone. To finish I used the medium grain sandpaper and worked along the length of the floorboards, before a couple of finishing passes with fine grain paper to give a smooth finish. Continue reading “A Song of Sand and Wood”